Need help?Do you have a question about the SATO CL408e/412e and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Print Resolution | 203 dpi (8 dots/mm) |
| Maximum Print Width | 104 mm (4.09") |
| Memory | 8 MB SDRAM |
| Interfaces | RS-232 |
| Optional Interfaces | Wireless LAN (802.11b/g) |
| Barcodes | Code 39, Code 128, Interleaved 2 of 5, Codabar, UPC-A, UPC-E, EAN-8, EAN-13 |
| 2D Symbologies | PDF417, QR Code, Maxi Code, Data Matrix |
| Media Type | Tag |
| Media Roll Diameter | 127 mm (5 inches) max. |
| Ribbon Width | 25.4 mm (1") to 109 mm (4.3") |
| Ribbon Length | 300 m (984 ft) |
| Power Supply | 100-240 VAC, 50/60 Hz |
Lists the various physical and network interfaces supported by the printer.
Confirms availability of the Windows driver and provides download URL.
Recommends SATO-specific software for full printer functionality.
Details printer compatibility with Windows and SAP environments.
Explains how to connect and send data from AS400 systems.
Describes storing label formats, fonts, and graphics on the printer.
Advises on choosing the correct carbon ribbon based on label material.
Provides guidance on cleaning the printer for longevity.
Explains the purpose, use, and capacity of memory cards.
Defines FLASH ROM and its storage capacity in the printer.
Details the various interfaces for connecting the printer to a PC or host.
Outlines the steps for setting up the printer after connection.
Explains the correct procedure for loading labels and carbon ribbon.
Describes how to select the label sensing method using DIP switches.
Step-by-step guide to adjust the print darkness settings.
Instructions for changing the printer's print speed settings.
Explains how to reprint the last label and feed a blank label.
Methods for cancelling a print job via the display or software.
Diagnoses issues related to a blank display or no printing.
Addresses poor print quality and unreadable barcodes.
Troubleshoots the printer feeding multiple blank labels instead of one.
Resolves issues with the printer not going online or displaying errors.
Explains 'FRAMING ERROR' and 'PAPER END' messages.
Addresses 'RIBBON END' errors and how to fix ribbon wrinkles.
To Next Page
