SATO CT400 - Font;Graphic Recall

Font/Graphic Recall
Command Structure <ESC>A<ESC>RFaabbbb,nn...n
aa = Font ID number (00 to 80)
bbbb = Number of characters to print (0000-9999)
nn..n = Data to be printed
Example: <ESC>RF010004,ABCD
Placement: Within normal command stream
Default: None
Command Function To recall fonts or graphic previously stored in the printer memory
using the Font/Graphic Store Utility Program.
Input to Printer
<ESC>A
<ESC>V0100<ESC>H0100
<ESC>RF010001,G
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1. To store or delete a graphic or font, the Font/Graphic Store Utility
program contained on the CD-ROM must be used.
2. To recall a graphic, the parameter “bbbb” must be “0001" and the
”nnn..n" parameter must be a “G”.
3. To recall a stored font, the SATO CX4XX Windows Driver should
be used.
Label Sample TBA
Section 4. Programming Reference
Page 4-369001069A SATOCTSeriesPrinters