SATO KENDO 22.6 - Handheld Labeling Solutions Operation; Loading Label Rolls; Replacing Ink Roller; Setting Print Characters

Handheld Labeling Solutions
Open the Label Roll Door by
pulling it back.
1
Simultaneously push the slides,
on either side of the tool,
towards the back, to open the
bottom of the tool.
2
Take the roll of labels and remove
one round, eliminating any glue,
simplifying the loading process.
3
Drop the labels down the center
of the tool gently feeding the
end through until it slides out
from the bottom.
4
After securing the roll of labels
onto the spindle and locking the
roll into place, close the label
roll door.
5
Pull about 6” of labels out and
securely close the tool door.
6
Insert the label end into the slot
marked “label”. Gently push the
labels into the marked slot.
7
Pump the tool handle, feeding
the labels into the tool until
printed labels are dispensed.
The tool is now ready to use.
8
Loading Label Rolls
Lift the button up at
the front of the tool
to open the ink roller
catch at the side of
the labeler.
1
With the button
lifted, tilt the tool to
release the ink roller.
2
Take the fresh ink
roller and slide it
onto the reel inside
the catch.
3
Gently release the
button, allowing the
catch door to close.
4
The tool is now
ready to use.
5
Replacing Ink Roller
Pull the pointer in or out as
required and rotate to select
print character.
1
Push the pointer back to its
original position.
2
Setting Print Characters
KENDO and JUDO Handheld Labeling Solutions
have been specically designed to meet the unique
needs of the food and grocery marketplace.
Lightweight and ergonomic, these handheld
tools are intuitive to use, allowing retailers to
smoothly manage store operations. High adhesive,
tamperproof labels make the compliance, date
marking and pricing process seamless and reliable.
Label Roll Cover
Slides
Tool Door
Tool Door
Handle