KDB-GOM
Series
- 89 -
No 11 Part name Electrode assembly
Replacement steps
Disassembly
①
Unplug the boiler from the electric outlet.
②
Open the front cover.
③
Separate the ignition transformer’s two high voltage cords connected to the electrode from the flame sensor
wire.
④
Unscrew the two screws fixing the electrode.
⑤
Separate the electrode from the boiler
Assembly
①
Fix the electrode to the boiler.
②
Fix the electrode by screwing the two screws
③
Connect the ignition transformer’s two high voltage cords and the flame sensor wire to the electrode.
④
Close the front cover of the boiler.
⑤
Plug the boiler into the electric outlet.
Caution
1. Check whether the fixation is correctly done and spark production is good.
2. Make sure the connecting jack is correctly connected.
④
⑤
To Next Page
Loading...