KDB-GOM
Series
- 91 -
No 13 Part name High limit fuse
Replacement steps
Disassembly
①
Unplug the boiler from the electric outlet.
②
Open the front cover.
③
Separate the high limit fuse wire jack.
④
Separate the high limit fuse unit by unscrewing one screw fixing it.
Assembly
①
Fix the high limit fuse unit by screwing one screw fixing it.
②
Connect the high limit fuse wire jack.
③
Plug the power cord into the electric outlet and check its operation.
④
If everything is fine, close the front cover.
⑤
Plug the boiler power cord into the electric outlet.
Caution
1. Check fixation is done without any shaking.
2. Make sure the connecting jack is assembled correctly.
④
To Next Page
Loading...