Sauder 411606 - Page 9

å
NOTE: Start each SCREW a few turns before completely tighening
any of them.
å
Fasten the MODESTY PANEL (G3) to the LEFT END (B3) and
UPRIGHT (C3). Use four BLACK 1-15/16" FLAT HEAD SCREW (113S).
Step 5
411606www.sauder.com/service
Page 9
C3
B3
G3
Unfi nished surface
The hole in the edge of
the MODESTY PANEL
is closer to this edge.
BLACK 1-15/16" FLAT HEAD SCREW
(4 used in this step)
113S