Sauder Carson Forge 416969 - Step 22: Stand Unit Upright; Stand unit upright, attach modesty panel & top

Step
416969www.sauder.com/services
Pae 27
Step 22
å
With someone's help, carefully stand your unit upriht.
å
Fasten the MODESTY PANEL (K) to the DRAWER LEFT
END (D). Use three BLACK 1-7/8" FLAT HEAD SCREWS (2S).
å
Fasten the SMALL TOP (I) to the TOP (H). Use eiht BLACK
9/16" LARGE HEAD SCREWS (1S) throuh the CONNECTOR
PLATES and into the TOP (H).
Pro Tip: Lift with your
les. And, you know,
your arms.
H
K
I
D
BLACK 9/16" LARGE HEAD SCREW
(8 used for the TOPS)
1S
BLACK 1-7/8" FLAT HEAD SCREW
(3 used for the MODESTY PANEL)
2S