Sauder Carson Forge 416969 - Step 21: Attach Connector Plates; Attach connector plates to small top

Step
å
Push two FEET (10E) onto the LEGS (Q and R).
å
Tap two TACK GLIDES (12E) throuh the FEET (10E) and into
the LEGS (Q and R).
å
Tap two TACK GLIDES (12E) into the bottom edes of the
DRAWER ENDS (C and D).
å
Fasten the CONNECTOR PLATES (14G) to the SMALL TOP (I).
Use eiht BLACK 9/16" LARGE HEAD SCREWS (1S).
Step 21
416969 www.sauder.com/servicesPae 26
Q
R
10E
12E
14G
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
12E
C
D
I