Saunacore Heaters - Commander Control for Emitters Power Supply

11 www.saun
Figure 16
acore.com
Commander Control For Emitters Power Supply
SAUNACORE
IMPORTANT!
Loose connections or connectors
may cause electrical shortage.
Make sure all connections and
connectors are firmly secure.
Note:
All power supply wires
from control box to stove
must be protected by
metal conduit.
CAUTION: THE MANUAL RESET LIMIT SHALL BE WIRED
IN THE CIRCUIT.
For supply connections, use suitable AWG wires suitable for at least
90 C (190 F). (Use copper wire only). - Ground wire must be insulated.
o
o
European Connection
( L2 = N - "Neutral" )