sauter flexotron 700 User Manual

RDT724 F002/F022
flexotron
®
700
flexotron controllers for ventilation and a/c
E
P100002032 003 A 1/6
Contents:
A: General Information
B: Displays and Operating Controls
C: Commissioning
D: Operation
A: General Information
Congratulations! You have chosen a Sauter controller - a
quality product from one of the leading manufacturers of control
technology equipment for the heating, ventilation and air
conditioning industry.
Your controller features extremely simple operation combined
with the very latest microprocessor technology.
Proceed according to these Operating Instructions to adapt the
device to your installation and your wishes. For further
information on the controller and the various applications,
please consult Manual 7010047.
A1: Safety warnings
Special care is required in order to prevent injuries, damage by
fire or damage to equipment. After the device has been
installed by a specialist in accordance with the Installation
Instructions enclosed with it, please read these instructions on
operating it.
A2: Key
SP Switching point

abcd

Key labelled 'abcd'
Factory settings
Basic display showing room setpoint
and actual room value
B: Displays and Operating Controls
B1: Front view
B2: Operating controls
menu

Load and confirm or save settings

Scroll in steps of 100
step

Scroll (single steps)
,

Change values or settings. Press for longer to
change values in large steps
step
+

Scroll (steps of 10)
step
+

Scroll backwards (single steps)
C: Commissioning
Important:
Before switching the installation on for the first time, disconnect
the main fuses for all fans and pumps. All the functions should
then be tested in a 'dry run', as it is known.
C1: Operating for the first time
,
Select language
menu
,
step
Accept language
,
Select application
menu
Confirm selection
menu
Load application
step
Call up first
parameter
,
Adjust value
A110:E1 function
3: Temp.Ni1000
Language
english
Display
Input keys
Setpoint 20.0°C
Act. val. 17.3°C
Language/Sprache
deutsch
A001:Application
0: None
A001:Application
204: CTR HCE
Load new appl.?
menu=execute
A001:Application
204: CTR HCE

sauter flexotron 700 Specifications

General

Brand	sauter
Model	flexotron 700
Category	Controller
Language	English

Summary

General Information

Safety Warnings

Special care required to prevent injuries, fire, or equipment damage during operation.

Key

Explanation of symbols and display elements like setpoint and actual value.

Displays and Operating Controls

Front View

Diagram and description of the controller's front panel layout.

Operating Controls

Details on using buttons like 'menu', 'step', and '+' for navigation and adjustments.

Commissioning

Operating for the First Time

Step-by-step guide for initial setup, including language and application selection.

Set the Time and Date

Instructions for configuring the device's internal clock and date settings.

Select and Parameterise the Application

Procedure to choose and configure the specific application for the controller.

Change Language Selection

Guide on how to modify the display language for user interface.

Manual Operation

How to manually control outputs and adjust parameters.

View and Change Communication Parameters

Settings for communication interfaces like BUSM.

Load Factory Settings

Procedure to reset the controller to its original factory default configuration.

Error Messages

Information on how to interpret and manage error codes displayed by the controller.

Technical Data

Operation (User)

View Setpoints and Actual Values

How to check current setpoints and measured room values.

Adjust Setpoints

Procedure for modifying setpoints for different operating modes.

View Input and Output Signals

Monitoring status of digital inputs and analog/relay outputs.

Switching Programme

Details on setting up and viewing time-based operating programs.