Need help?Do you have a question about the sauter NRT405F901 and is the answer not in the manual?
General| Analog outputs | 2 |
|---|---|
| Housing material | Plastic |
| Weight | 200 g |
| Digital outputs | 4 |
| Communication | RS-485, Modbus RTU |
| Output current | 0.5 A |
| Storage temperature | -20 °C to +70 °C |
Details supply voltage, power consumption, communication types, and speeds.
Lists available inputs and outputs with their specifications and functions.
Details the use of NRT tool for configuration and pre-installation steps.
Covers communication cabling requirements and basic wiring principles.
Provides specific wiring diagrams for different actuator types.
Details wiring configurations for different actuator types and their terminal functions.
Offers guidance on resolving issues and using controller indications for diagnostics.
Describes the operation of the On/Off and setpoint adjustment buttons.
Details how to access and modify controller parameters using the device's buttons.
Explains automatic fan speed adjustment based on heating/cooling demand.
Guides users on accessing the parameter menu via the display.
Lists and describes the available controller parameters for configuration.
Explains how settings and configurations are saved in EEPROM during power failures.
Explains the different types of Modbus registers and functions.
Covers scaling factors, wiring standards (RS485/RS422), and basic configurations.
To Next Page
