sauter NRT405F901 - BACnet Multistate Values and Device Objects

NRT405F901 manual Chapter 19 BACnet signals 47
Multistate values
Object name Object ID Description Values Writeable
RC_Setp_X.NRTHeatOutputSelect Multistate value, 0 Manual/Auto
heat output
1=Off
2=Manual output
3=Automatic output
Yes
RC_Setp_X.NRTCoolOutputSelect Multistate value, 1 Manual/Auto
cool output
1=Off
2=Manual output
3=Automatic output
Yes
RC_Setp_X.NRTFanSelect Multistate value, 2 Fan mode select 1=Off
2=Manual speed 1
3=Manual speed 2
4=Manual speed 3
5=Auto
6=Auto 2
7=Auto 1
Yes
Not used in this model Multistate value, 3 Manual/Auto
forced ventilation
1=Off
2=Manual on
3=Auto
Yes
RC_Setp_X.NRTChangeOverSelect Multistate value, 4 Manual/Auto
change-over
1=Heating
2=Cooling
3=Auto
Yes
RC_Setp_X.NRTRemoteState Multistate value, 5 Remote control
unit state
1=Off
2=Economy/Standby
3=Economy/ Standby
4=Presence
6=No remote control
Yes
Device
The Device object contains to writeable properties; Description and Location. Description
can be 17 characters in length and Location can be 33 characters, as long as single byte
character encoding is used.