NRT405F901 manual Chapter 7 Commissioning 17
Chapter 7 Commissioning
It is easiest to set parameters by using NRT tool.
If the measured room temperature is to be compensated for, this should be performed only
under stable conditions.
Troubleshooting
The Manual/Auto function in NRT tool enables testing various outputs. The output itself is
not affected directly, but rather the software object that controls the output. This means that
the built-in safety functions cannot be deactivated.
The controller has different types of indications which can be used to support
troubleshooting. See section Indications.
To Next Page
Loading...
