Need help?Do you have a question about the sauter ASV3 and is the answer not in the manual?
General| Weight | 0.2 kg |
|---|---|
| Operating temperature | 0...+50 °C |
| Communication | Modbus RTU |
| Storage temperature | -20 °C to +70 °C |
| Number of analog inputs | 0 |
| Number of relay outputs | 0 |
| Number of analog outputs | 0 |
Detailed technical specifications of the VAV actuators, covering inputs, outputs, and features.
Overview of the different ASV305BF7XXXW series VAV actuator models available.
Guide to setting mechanical rotation limits for damper control on VAV boxes.
Instructions for physically mounting the controller onto a VAV terminal box.
Guidelines for connecting the appropriate power supply to the controller.
Step-by-step guide to initiating the configuration process for VAV boxes and actuators.
Procedure for setting system temperature parameters and limits via the thermostat interface.
Procedures for airflow testing and zero calibration of the VAV system.
Explanation of single-duct cooling/heating VAV control configuration without reheat.
Overview of operational sequences for ASV305BF7XXXW controllers in HVAC applications.
Identifying necessary sensors for measuring room temperature and airflow.
Details on temperature set-points for heating and cooling modes.
How the active set-point is determined by occupancy and thermostat settings.
Definition of the occupied set-point used during active system occupancy.
Instructions for connecting controllers to a BACnet MS/TP network.
Guidelines for proper cabling and wiring for MS/TP network connection.
Configuring network settings like Instance ID, MAC address, and baud rate.
List of BACnet object IDs for controller inputs and outputs.
List of BACnet object IDs for analog values and their properties.
List of BACnet object IDs for binary values and their properties.
To Next Page
