Savant SmartControl 12 - 1 Introduction; Before You Begin

1. Introduction
This Deployment Guide will guide the installer through the process of installing, configuring, and adding a
SmartControl 12 (SSC-0012) controller.
Before You Begin
Read through this document in its entirety and ensure that the following required items are available:
......................................................................................................................SmartControl 12 (SSC-0012) controller
................................................................................................................................Unique ID (UID) of the controller
(located on the bottom of the unit)
..........................................Savant Host (Smart or Pro Host) licensed and running da Vinci 7.0 or higher
...........................................................................................Savant Development Environment (SDE) MacBook®
(with RacePoint Blueprint da Vinci 7.0 or higher installed)
...................................................................................................Ethernet network meeting Savant requirements
(see Network Requirements)
SmartControl 12 Controller Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-1268-01 | 160308
3
of
16