SawStop RT-LFT - Operations; Safety for the Downdraft Dust Collection Box

18
RT-LFT/RT-DCB OWNER’S MANUAL
OPERATIONS
Safety for the Downdraft Dust Collection Box
1. The Downdraft Dust Collection Box should always be used with a vacuum or dust
collector to maintain airow within the box. Without proper airow, your router can
overheat and become damaged.
2. The router access door on your Downdraft Dust Collection Box allows you to access
the underside of your router table, your router lift, and your router. The door is secured
using a magnet just inside the front panel of the box, and should always be kept
closed while the router is plugged in or in use.
3. The adjustable vent can be used to change the airow through your Downdraft Dust
Collection Box to match the power of your dust collector. The optimum position of the
adjustable vent depends on the conguration of your router and power of your dust
collector.