SawStop RT-LFT - Page 30

25
RT-LFT/RT-DCB OWNER’S MANUAL
No. Description Part No. Qty.
1.33 M6 x 1.0 x 30 Socket Head Cap Screw RT-LFT-033 1
1.34 Spring Pin (3mm x 18mm) RT-LFT-034 1
1.35 Lock Arm Spring RT-LFT-035 1
1.36 8mm ID x 16mm OD Ball Bearing RT-LFT-036 1
1.37 M14 x 2 Lock Nut RT-LFT-037 1
1.38 Elevation Chain RT-LFT-038 1
1.39 M6 x 1.0 Lock Nut RT-LFT-039 4
1.40 M6 x 11 x 1.5 Washer RT-LFT-040 8
1.41 Router Clamp Plate RT-LFT-041 4
1.42 Clamp Plate M10 Barrel Nut RT-LFT-042 1
1.43 M10 x 1.5 Hex Jam Nut RT-LFT-043 2
1.44 Cross-Drilled Clamp Plate Spacer RT-LFT-044 1
1.45 M10 x 1.5 x 55 Socket Head Cap Screw RT-LFT-045 1
1.46 M6 Clamp Plate Spacer RT-LFT-046 4
1.47 M10 Clamp Plate Spacer RT-LFT-047 3
1.48 M10 x 25 x 3 Washer RT-LFT-048 3
1.49 M10 Lock Washer RT-LFT-049 3
1.50 M10 x 1.5 x 70 Socket Head Cap Screw RT-LFT-050 3
1.51 M6 x 1.0 x 60 Socket Head Cap Screw RT-LFT-051 4
1.52 Insert Wrench RT-LFT-052 1
1.53 3.5” Router Reducer Collar RT-LFT-053 1
1.54 3.25” Router Reducer Collar RT-LFT-054 1
1.55 2.5 mm Hex L-Wrench RT-LFT-055 1
1.56 3 mm Hex L-Wrench RT-LFT-056 1
1.57 4 mm Hex L-Wrench RT-LFT-057 1
1.58 6 mm Hex L-Wrench RT-LFT-058 1
1.59 Router Lift Owner’s Manual RT-LFT-059 1
Parts List 1: Four-Post Router Lift with Lock (Cont.)