SBC PCD2.M120 - 5.12 Analogue input and output modules

Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
5
Input/output (I/O) modules
5-90
Analogue input and output modules
5.12 Analogue input and output modules
PCD2.W500 2 analogue inputs 12 bit + 2 analogue outputs 12 bit,
0 … 10 V, -10 V … +10 V *)
PCD2.W510 2 analogue inputs 12 bit + 2 analogue outputs 12 bit,
0 … +20 mA, -20 … +20 mA *)
*) jumper selectable
I/O modules and I/O terminal blocks may only be plugged in and removed when the
Saia PCD
®
and the external +24 V are disconnected from the power supply.