Need help?Do you have a question about the SBC PCD3 Series and is the answer not in the manual?
General| Brand | SBC |
|---|---|
| Model | PCD3 Series |
| Category | Controller |
| Language | English |
Covers essential aspects for planning PCD3 applications, including load current and module limits.
Provides recommendations for wiring I/O modules from a cable duct.
Details how I/O slot module addresses are determined by their slot and carrier.
Introduces CPU for centralized tasks and RIO for decentralized tasks.
Provides key technical specifications including supply, climatic, vibration, and safety data.
Covers different PCD3 CPU types and their block diagrams.
Describes how to extend PCD3.Mxxxx with module carriers for more slots.
Provides an overview of available module carriers for PCD3 systems.
Covers mounting position, ambient temperature, and assembly/disassembly.
Explains external and internal power supply concepts and connection plans.
Explains the grounding plate and multi-point contact for reliable operation.
Covers buffer capacitors and batteries for maintaining data during power loss.
Describes how to control the CPU's operating mode using push-buttons or switches.
Covers implementing manual control and emergency operations with specific modules.
Provides a detailed overview of all connections for the PCD3.Mxxx0 series.
Discusses different storage types like RAM, Flash, and FRAM.
Introduces RIOs for decentralized I/O signals and their web server capabilities.
Explains the meaning of connections for Profibus DP, Profi S-Net, and RS-232.
Covers LED meanings and DP diagnosis for RIOs.
Lists and summarizes onboard communication interfaces available on PCD3 CPUs.
Details the RS-232 connector pinout and its use for communication and programming.
Describes the RS-485/RS-422 interface pinout and signal definitions.
Explains the RS-485 interface pinout for S-Net/MPI communication.
Explains how to connect and configure the USB interface for programming.
Discusses Ethernet RJ-45 and Profibus network concepts and features.
Details the RS-485/Profi S-net/DP slave interface pinout and terminating resistors.
Provides an overview of plug-in interface modules for I/O slots.
Refers to the PG5 User Manual for CPU commissioning instructions.
Explains battery replacement for PCD3.M5xx0/M6xx0 CPUs, including LED indicators.
Details battery change procedure for PCD3.M3xx0 using the PCD3.R010 module.
To Next Page
