SBC PCD3 Series User Manual

Saia-Burgess Controls AG
Hardware manual for PCD3 series │ Document 26-789 ENG19│ 2018-06-29
Contents
0-4
0
0.1 Document versions
Version Date Updated Comments Chapter
ENG02 03-11-2003 - - Translation
ENG03 15-08-2004 01-10-2004 - Revision
ENG04 01-10-2004 - - Training CPU
ENG05 31-01-2005 - - Amendments
ENG06 01-07-2005 15-11-2005 - Incorporation of new modules, order according
to price list, further updates and changes
ENG07 01-10-2006 10-07-2007 - Further detailed amendments and changes
ENG08 10-07-2007 15-07-2007 - Further detailed amendments and changes
ENG09 05-01-2009 15-01-2009 - Further changes
ENG10
21-01-2010
05-03-2010
24-03-2010
23-10-2009
21-01-2010
05-03-2010
24-03-2010
- Deletion of DIN40040
- ConguationPort#3PCD3.M5430
- List of discontinued I/O modules
- Pinassignmentofport#10,pin6
- Resolution A/D converter PCD3.W525
3
6.1.6
3.10
6.13.1
ENG11 17-05-2010
12-07-2010
26-07-2010
26-07-2010
26-07-2010
26-07-2010
- Bu󰀨ertimesupercap
- Connection concept for PCD3.F180
- Connection concept for PCD3.W2x0
3.4
3.12
8.1
5.5.6
6.8.1
ENG12 10-11-2010
10-11-2010
10-11-2010
10-11-2010
- Professional S-Net 1.5 Mbps not with M5340
- Ground connection PCD3.W3x0
3.4
6.8.2
ENG13 28-06-2011 28-06-2011 - External + 24V power supply and Ethernet full
duplex
3, 5, 6
ENG14 22-09-2011 23-09-2011 - Using the SBC S-Bus 5
29-09-2011
25-10-2011
- New CPU types PCD3.Mxx60
- Label-Creator replaced with: Label editor of the
devicecongurator
ENG15 05-04-2012
13-04-2012
22-11-2012
10-05-2013
20-11-2012
20-11-2012
22-11-2012
10-05-2013
- Storage temperature changed from -20 to -25 ° C
- Addresses changed
- Chapter deleted
- Behaviour of the diagnostic LED
3.2
A.5
9
3.14
ENG16 06-12-2013
07-02-2014
-
07-02-2014
- Change of Logo
Internet security advice
ENG17 07-08-2014 16-09-2014 - Chapter Ch06 I/O modules moved to manual
27-600
6
ENG18 08-01-2015 08-01-2015 - RS-485 interface port 3 on PCD3.M5xx0 3.10
ENG19 2017-04-04
2018-01-09
2018-10-29
2018-01-09
2018-10-29
- New CPU PCD3.Mxx60
- New 10 pin connector
- Memory on PCD3
- General revision
- PCD3.W800 can be used with base address 240
- Harmonized couours and fonts
3
all
3.18
all
3.15
all

SBC PCD3 Series Specifications

General

Brand	SBC
Model	PCD3 Series
Category	Controller
Language	English