SBC PCD3 Series - Run;Stop Switch

Saia-Burgess Controls AG
Hardware manual for PCD3 series │ Document 26-789 ENG19│ 2018-06-29
Operating mode (Run/Stop)
PCD3.Mxxx0 Classic CPU and expansion enclosure
3-34
3
3.12.2 Run/Stop switch
WiththePCD3.M5xx0itisfurthermorepossibletoinuencethe
operating status with a switch accessible on the front under the
blue cover.
If the control is switched to Stop, this results in a change from
Run to Stop. When switching to Run, a cold start is executed.
To enable the switch, check the options in the hardware settings
of the PG5.
5540
Saia PCD3.M
Saia PCD3Saia PCD3 Saia PCD3Saia PCD3 Saia PCD3Saia PCD3 Saia PCD3Saia PCD3