Page 23
8.9 Date and Time Settings
During operation the information header always displays the current date and time. Date and time have
to be set once during initial startup of the instrument.
To set date and time
1. Press <Menu> and select “Setup > Date and Time > Set Date and Time”.
2. Enter the current day, month and year using the arrow keys and confirm each of your selections
by pressing <OK>.
The cursor moves to the next value to be set.
3. Press <Save>.
Now the time settings are displayed on the screen.
4. Repeat the procedure to enter the current time and press <Save>.
Date and time are now displayed in the information header.
To set the date format
1. Press <Menu> and elect “Setup > Date and Time > Date Format”.
2. Select the preferred date format and press <OK>.
To set the time format
1. Press <Menu> and select “Setup > Date and Time > Time Format”.
2. Select the preferred time format and press <OK>.
To Next Page
Loading...