SBS SBS-3500 - Printing the Saved Measuring Data; Deleting the Saved Measuring Data

Page 41
9.9 Printing the Saved Measuring Data
You can transfer the saved measuring data to a printer via the IrDA interface. For a compatible printer,
contact your SBS representative.
To print a selected measured value
1. Switch on the printer with the IrDA interface.
2. Press <Menu> and select “Measuring Data”.
3. Select the measured value required for printing using the arrow keys.
4. Press <Export>.
5. Select <Print Selected> to print the selected measured value.
6. Hold the IrDA interface of the SBS-3500 to the IrDA interface of the printer to allow
communication between the printer and density meter.
The measured value is printed.
To print all saved measuring data
1. Switch on the printer with the IrDA interface.
2. Press <Menu> and select “Measuring Data”.
3. Press <Export>.
4. Select <Print All> to print the whole list of measuring data.
5. Hold the IrDA interface of the SBS-3500 to the irDA interface of the printer to allow
communication between the printer and density meter.
All measuring data are printed.
9.10 Deleting the Saved Measuring Data
To delete the last measured value
1. Press <Menu> and select “Measuring Data”.
2. Select a measured value and press
3. Select <Delete Last> and press <OK>.
4. Press <Delete> when asked if you really want to delete the last measured value.
The last measured value is removed from the list.
To delete all measuring data
1. Press <Menu> and select “Measuring Data”.
2. Select a measured value and press
3. Select <Delete All> and press <OK>.
4. Press <Delete> when asked if you really want to delete all measuring data.
All measuring data are deleted.