To Next PageTo Next PageWhy is my Scag Power Equipment Turf Tiger II leaving a sloping ridge across the width of the cutting path?
A sloping ridge across the width of the cutting path can be caused by several factors: * Unequal tire pressures. Check and adjust tire pressure. * Uneven wheels. Check and adjust tire pressure. * Incorrectly mounted deck. See your authorized SCAG dealer. * Deck not level side-to-side. Check for level and correct.
How to fix streaking with my Scag Power Equipment Lawn Mower when there are strips of uncut grass between cutting paths?
If your Scag Power Equipment Lawn Mower is leaving strips of uncut grass between cutting paths, the issue is likely due to not enough overlapping between rows. Increase the overlap of each pass to resolve this.
What causes an uneven cut on uneven ground with my Scag Power Equipment Turf Tiger II Lawn Mower?
If you're experiencing an uneven cut (wavy appearance, high-low scalloped cut, or rough contour) while mowing on uneven ground with your Scag Power Equipment Lawn Mower, the primary cause is the uneven ground itself. To mitigate this, you may need to reduce ground speed, raise the cutting height, and/or change the direction of cut.
General| Fuel Type | Gasoline |
|---|---|
| Spindle Material | Cast Iron |
| Turning Radius | Zero-turn |
| Engine Options | Kawasaki FX, Kohler |
| Fuel Capacity | 12 gallons |
| Warranty | 3-year |
| Cutting Width | 52-72 inches |
Overview of the manual and direction conventions.
Guidelines for engine and drive train servicing.
Operator safety importance and hazard signal word meanings.
Pre-operation checks and safe operating practices.
Guidelines for using and maintaining the ROPS.
Identification and importance of safety decals on the machine.
Details on engine models, displacement, type, and carburation.
Information on deck type, construction, cutting width, and blades.
Explains the dashboard indicators and their functions.
Detailed description of all mower controls and their uses.
Procedures for starting the engine and basic operation.
Safety precautions for operating the mower on slopes.
Procedures for adjusting neutral tracking and steering.
Steps for adjusting deck level, pitch, and height.
How to adjust the air gap on the electric clutch.
Schedule for routine maintenance tasks based on operating hours.
Details on greasing points and lubricant types.
Procedures for checking and changing hydraulic oil.
Instructions for checking and changing engine oil and filter.
Guidance on inspecting, sharpening, and replacing cutter blades.
List of compatible attachments and accessories for the mower.
Exploded views and part numbers for cutter decks.
Exploded views and parts for various engine configurations.
Exploded views and parts for hydraulic and steering systems.
Wiring diagrams for different engine types.
Information on available safety and instructional decals.
