SCAN 60 - Removing Baffle for Cleaning; Air Tube Removal; Remove the Screw (Pos.3) on the Right Air Tube Collar (Pos.2)

22
Removing Baffle for Cleaning.
Be sure the fire is out and the stove is cold before removing baffle plate. Be cautions with handling
the plates because the plates are made of a delicate material; which easily broke if not handle with
care.
Removal of the lower plate: lift the plate (pos.9) up from the supporting pins (pos.11) and take the
pins out from the side plates (pos.6, pos.8) and take out the plate. Use the same procedure for the
upper plate (pos.10) and take out plate.
See the drawing below:
Mounting in reverse order, observe: the plates are placed as such that the supporting pins fit into
the groove in the plates.
WARNING:
Do not operate stove without Baffle plates properly installed or warranty will be void.
Air Tube removal:
Remove the screw (pos.3) on the right air tube collar (pos.2).