SCAN 80 - Height Adjustment

P-P ( 1 : 7 )
R ( 1:5 )
P
P
R
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580034.idw
90580034varmeakkumulerende sten 19-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
og lukke den lagrede varme ud
P-P ( 1 : 7 )
R ( 1:5 )
P
P
R
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580034.idw
90580034varmeakkumulerende sten 19-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
og lukke den lagrede varme ud
P-P ( 1 : 7 )
R ( 1:5 )
P
P
R
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580034.idw
90580034varmeakkumulerende sten 19-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
og lukke den lagrede varme ud
P-P ( 1 : 7 )
R ( 1:5 )
P
P
R
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580034.idw
90580034varmeakkumulerende sten 19-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
Spjæld for varmeakkumulerende sten i lukket position
Trækkes til venstre for at åbne for konvektionshullerne i toppen
og lukke den lagrede varme ud
13
FLOOR PLATE
If you are placing the stove on a flammable floor, you must comply with the national and local regulations on the size of
any non-flammable subsurface required to cover the floor around the stove.
Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your
stove.
The floor plate’s function is to protect the floor and flammable material against any sparks that may occur.
The heat-storage stones are
placed in the High Top around the
flue pipe as illustrated.
Place the High Top over the
heat-storage stones.
Vent for heat-storage stones in
closed position.
Pull to the left to open the
convection holes in the top
and let out the stored heat.
HEAT-STORAGE SYSTEM
Heat-storage stones are made from a special material with a high heat capacity. The stones are heated when the stove is
on, re-releasing heat once it is off. This extends the time over which the stove remains warm.
¬ Firing with the vent open will give a quicker heating. Firing with the vent closed will extend the heating time of the
stove.
Large shaped floor plate in clear or
smoke-coloured glass for the Scan 80-series
Small floor plate in clear or
smoke-coloured glass for the Scan 80-series
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580030.idw
90580030
glasgulvplader
16-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
3
0
3
9
5
2
4
5
5
0
3
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580030.idw
90580030
glasgulvplader
16-05-2017
jwa
Scan 80
Weight:
Area:
N/A N/A
3
0
3
9
5
2
4
5
5
0
3