SCAN 80 - Type Plate Information

Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 80\90580031.idw
90580031
Placering af typeskilt
17-05-2017
sr
Scan 80
Weight:
Area:
N/A N/A
8000000
Scan 80-Series
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
Reaction to fire: A1
Country
EN 13240 DoP 90580600
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 6 mg/Nm³
Flue gas temperature: 195°C
Nominal heat output: 6 kW
Efficiency: 84%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 450 mm - Back: 175 mm - Front: 800 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
The appliance can be operated in a shared flue.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 06-2017
0,06% 800 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
8
PRODUCT REGISTRATION NUMBER
All Scan wood-burning stoves are provided with a product registration number.
Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your
dealer or Scan A/S.
The product registration number is located at the rear of the stove.
TYPE PLATE
All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flam-
mable materials.
The type plate is located at the rear of the stove.
Type plate
Product registration number
Type plate
Product registration number