EasyManua.ls Logo

SCAN 80 - Vertical Lighting Method; Continuous Operation; Warning About Over-Firing

SCAN 80
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
GENERAL NOTES
PLEASE NOTE! Parts of the wood-burning stove, especially the outer surfaces, become hot during use. Due care should be
exercised.
¬ Never empty ashes into a flammable container. Ashes can contain glowing embers long after you finish operating
the stove.
¬ When the stove is not in use you can close the dampers to avoid a draught through the stove.
¬ If the stove has not been used for some time, you should check the flue passageways for potential blockages before
relighting.
NOTE: Never place flammable material in the radiation zone of the stove!
CHIMNEY FIRE
In the event of a chimney fire, keep the stove door, ash drawer, and all dampers on the stove closed. In an emergency, call
the fire service.
¬ We recommend that you get a chimney sweep to check the chimney before using the stove again.

Table of Contents

Other manuals for SCAN 80

Related product manuals