Dear Customer!
Thank you for choosing Scanmaskin as your supplier.
W
e wish you all the best with your new Scanmaskin 18 and hope that it meets
your expectations.
S
canmaskin Sweden AB
C
laes-Göran Bergstrand
Managing Director
Address:
S
canmaskin Sweden AB
Box 187
SE-437 22 Lindome / Gothenburg
Sweden
Telephone: +46 (0) 31 99 49 70
Fax: +46 (0) 31 99 48 70
www.scanmaskin.com
Important Information!
This User Guide only concerns the floor grinding machines “Scanmaskin 18”
Scanmaskin 18 may only be used for grinding horizontal surfaces approved by
Scanmaskin Sweden AB.
If Scanmaskin18 is used for other purposes or handled in ways other than that
described in this User Guide, Scanmaskin Sweden AB disclaims all
responsibility.
Especially note the section “
2 Safety Regulations”. Read the User
Guide before using the floor grinding machine Scanmaskin 18. The
spare parts, grinding discs used on Scanmaskin 18 must be approved
by Scanmaskin Sweden AB.
34 35
ENGLISH
SCANMASKIN 18
www.scanmaskin.com www.scanmaskin.com
To Next Page
