7 Warranty
This product from Scanmaskin Sweden AB comes with a twelve month warranty. If the product does not function
satisfactorily during this period, Scanmaskin will return the product to full working order for normal use which the product is
intended for – with no charge for labor or spare parts, according to the following conditions:
1. The warranty only applies to persons that have legal right to the equipment during the warranty period.
2. The manufacturer's undertaking is limited to the repair of defective parts or the replacement of these according to the
manufacturer's assessment. Costs and risks for transport as well as dismantling and reinstallation of the product /
products and other direct or indirect costs, associated with the repair in question, are not covered by this warranty.
3. Periodic inspections, adjustments, maintenance work and changes are not covered by the warranty.
4. Scanmaskin is not liable for any damages to grinding discs or other similar equipment.
5. The warranty only applies to material and design deficiencies and does not apply in the following cases:
a. Damage caused through accidents, carelessness, changes, use of spare parts or grinding tools that are not
original components, or incorrect use and installation.
b. Damage caused by lightning, water, fire, vandalism, incorrect mains voltage, incorrect ventilation or other
causes that lie outside of the manufacturer's control.
6. Scanmaskin reserves the right to modify the design – or make improvements without obligation to change
previously manufactured products.
7. All warranty repairs must be carried out by Scanmaskin or by a Scanmaskin authorized repair workshop. Costs for
repairs, carried out by an unauthorized workshop, will not be reimbursed by Scanmaskin. If such repairs damage this
product these are not cover by the warranty agreement.
66 67
ENGLISH
SCANMASKIN 18
www.scanmaskin.com www.scanmaskin.com
To Next Page
