To Next PageTo Next PageWhy is picture distorted on my Sceptre HDTV?
Picture distortion or abnormal sound on your Sceptre HDTV might be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to a wall, try moving it to another room to see if the issue persists.
How to get 1360x768 on PC VGA Sceptre HDTV?
To achieve a resolution of 1360x768 on your Sceptre HDTV using PC VGA, ensure the TV is recognized as a plug-and-play monitor. Also, try updating your video card's drivers. If the problem persists, you may need to upgrade your video card to a newer one.
Why does my Sceptre HDTV have no picture?
If your Sceptre HDTV displays no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify the video cable is properly connected and that you've selected the correct input signal source using the source button, matching the cable connection.
How to fix Sceptre HDTV HDCP video says no HDCP support?
To resolve the 'No HDCP Support' message on your Sceptre HDTV, reboot your HDCP video device by turning it off and unplugging the power cord.
Why does my Sceptre HDTV turns on or off slowly?
Your Sceptre HDTV turns on or off slowly because it is a High Definition liquid crystal display panel TV, which requires a few more seconds than normal TVs to power up and display the picture.
How to fix weak signal or no program symbol on Sceptre HDTV screen?
If you see a weak signal or no program symbol on your Sceptre HDTV screen, try changing the direction of your antenna and rescanning the channels. If you have cable, contact your cable provider to inquire about the signal strength of your local cable.
How to fix abnormal colors on Sceptre HDTV?
To correct abnormal colors on your Sceptre HDTV, ensure that the colors on the cables match the ports on the back of the TV. For example, connect the red cable to the red-colored port.
How to unblock TV channels on Sceptre HDTV?
To unblock TV channels on your Sceptre HDTV, check the settings for the auto lock function within the OSD.
Why does my Sceptre HDTV have no color?
If your Sceptre HDTV displays no color, adjust your picture settings and ensure that the saturation and RGB settings are not turned all the way down. Also, check your signal strength, as the TV’s tuner signal must not be lower than 65 %.
What to do if Sceptre HDTV picture is too dark?
If the picture on your Sceptre HDTV is too dark, adjust the contrast, brightness, and lamp settings through the OSD Menu.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 720p (1366 x 768) |
| Display Type | LED |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60Hz |
| USB Ports | 1 |
| Built-in Speakers | Yes |
| Inputs | HDMI, USB, Composite Video |
| Audio Output | 3.5mm audio jack |
