To Next PageTo Next PageWhy does my Sceptre HDTV have audio only but no picture?
If your Sceptre HDTV has audio but no picture, verify that both your video and audio cables are securely connected. Also, ensure the TV’s tuner signal is not lower than 65 %.
Why does my Sceptre HDTV have picture only but no audio?
If your Sceptre HDTV shows a picture but has no audio, first ensure the audio cable is properly connected. Then, readjust the volume using the remote control. Also, make sure that the TV’s tuner signal is not lower than 65 %.
What to do if Sceptre HDTV remote control does not work?
If your Sceptre HDTV remote control isn't working, turn off the TV and unplug it. Remove the batteries from the remote for 30 minutes, then press the remote buttons and the power button randomly for 2 seconds before reinstalling the batteries. Also, ensure there is a clear line of sight between the remote control's front sensor and the TV's remote sensor.
Why Sceptre HDTV cannot receive sufficient channels through the ATSC/NTSC tuner?
If your Sceptre HDTV cannot receive enough channels through the ATSC/NTSC tuner, it may be due to a weak signal. Change the direction of your antenna and rescan your channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 720p (1366 x 768) |
| Display Type | LED |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60Hz |
| USB Ports | 1 |
| Built-in Speakers | Yes |
| Inputs | HDMI, USB, Composite Video |
| Audio Output | 3.5mm audio jack |
