How to fix a weak signal on Sceptre HDTV?
The TV’s tuner signal must not be lower than 65 %. Change the direction of your antenna and rescan your channels. If you have cable, contact your cable company and inquire about the signal strength of your local cable.
Why does my Sceptre X46 HDTV turn on so slowly?
Your Sceptre HDTV is a High Definition liquid crystal display panel TV. It requires a few more seconds than normal TVs to power up and show the picture.
What to do if my Sceptre HDTV has no picture?
Check that the power cord is correctly connected and the power is turned on. Also, ensure the video cable is properly connected. Select the correct input signal source using the source button, ensuring it matches the cable connection.
Why does my Sceptre X46 HDTV turn off after 5 minutes?
The Sceptre HDTV features a power-saving mode that automatically turns off the TV if there's no signal for more than 5 minutes.
Why can't I change the time manually on my Sceptre HDTV?
Your Sceptre HDTV syncs time automatically according to your local TV channel. This function only works while the TV’s tuner is connected to an ANTENNA.
How to fix Sceptre X46 channels that are blocked?
Check your auto lock function’s settings inside the OSD. You may have locked up some channels but forgotten about them.
How to fix no color on Sceptre X46 HDTV?
If your Sceptre HDTV has no color, adjust your picture settings and ensure that the saturation and RGB settings are not turned all the way down. Also, check your signal, as the TV’s tuner signal must not be lower than 65 %.
What to do if my Sceptre X46 cannot receive sufficient channels through the ATSC/NTSC tuner?
The TV’s tuner signal must not be lower than 65 %. Change the direction of your antenna and rescan your channels. If you have cable, contact your cable company to ask about the signal strength of your local cable.
Why is there picture but no audio on my Sceptre X46 HDTV?
Ensure the audio cable is properly connected. Readjust the volume using the remote control. Also, the TV’s tuner signal must not be lower than 65 %.
What to do if Sceptre X46 HDTV cannot find channels?
If your Sceptre HDTV cannot receive sufficient channels through the ATSC/NTSC tuner, and the TV’s tuner signal must not be lower than 65 %, change the direction of your antenna and rescan your channels. If you have cable, contact your cable company to ask about the signal strength of your local cable.
General| Screen Size | 46 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Resolution | 1920 x 1080 |
| Inputs | HDMI, Component, Composite, VGA, RF |
| Speakers | 2 x 10W |
Essential guidelines for safe installation, operation, and maintenance of the television.
Guidance on grounding antennas according to electrical codes and protection against lightning.
Details on unpacking the TV, checking package contents, and preparation before use.
Explains front view indicators, side control buttons, and rear connection ports.
Information on selecting the right port, understanding cable types, and switching sources.
Step-by-step guides for connecting antennas, cables, DVD players, game consoles, and PCs.
Instructions for powering on the TV and scanning for channels using antenna or cable.
How to use the TV's menu system via remote or side panel buttons for adjustments.
Guides for adjusting picture modes, backlight, brightness, contrast, and sound settings.
Explains parental controls, caption settings, date/time, sleep timers, and PC setup.
Proper methods for cleaning the TV screen, bezel, and remote control.
A guide to resolving common issues with picture, sound, remote control, and signal reception.
Information on how to get technical support and customer service.
Detailed list of the TV's display panel, TV display, function, and I/O specifications.
Details on warranty coverage, terms, exclusions, trademarks, and FCC compliance.
To Next Page
