Need help?Do you have a question about the Schaefer DMD 30 and is the answer not in the manual?
Explains the DMD 30/35's use as position indicators and direction arrows, and its configuration options.
Provides a visual representation of the DMD 30/35 display unit and its physical components.
Details on configuring the DMD 30/35 either at the manufacturer or on-site using a kit.
Lists article numbers for different connection PCBs (Encoder, Connector) for various encoder types.
Guidance on choosing between Encoder and Connector PCBs based on floor count and signal type.
Explains the function and layout of DIP switches for dot-matrix and input configurations.
Describes the use of buttons and status LEDs for adjusting settings and monitoring input.
Details on selecting input coding types (Binary, Gray, 1 out of n) and connection variants (common cathode/anode).
How to adjust presentation modes (standing, blinking, scrolling) and flashing/scrolling frequency.
How to adjust the display brightness levels using dedicated DIP switches and buttons.
Key specifications including voltage, current, temperature range, and luminosity.
Information on different model variants like splash-proof and temper proof versions.
To Next Page
General