HT 12 Unimog 1.96 13
5.3 Excavator operation
5.3.1 General
The excavator is equipped as standard with ISO control, upon which the following
description is based.
Attention
If the customer so wishes, the excavator may be equipped with a different control.
Your excavator must therefore be checked to see whether or not a different control
is installed. Incorrect operation may endanger persons or objects.
Before commencing work, memorise the lever controls well. Commence at low engine
speed when familiarising yourself with the controls.
5.3.2 Actuation of work equipment
5.3.3 Actuation of stabilisers
To Next Page
Loading...