22 HT 12 Unimog 1.96
7.3 Care and cleaning
Note
The machine must be cleaned on a suitable
surface with an oil separator.
1. Neither a steam-jet appliance nor a high-
pressure cleaning apparatus may be used for
cleaning during the first two months after the
machine is used for the first time or when newly
painted.
2. Do not use aggressive detergents for cleaning
the machine. We recommend using commercially
available cleaning agents for passenger cars.
3. When cleaning with a steam-jet appliance, the
hot water jet must not exceed 80 °C and a spray
pressure of 20 bar. The nozzle must be at a
minimum distance of 30 cm from the machine.
4. Do not clean the operator’s seat with direct
water, steam or high pressure jets.
5. After each wet clean, the machine must be
lubricated in accordance with the lubricating plan
and a test of all work cycles, support and driving
functions carried out.
To Next Page
Loading...