HT 12 Unimog 1.96 3
1.4 Delivery and handing-over
instructions
The following checklist is to be
adhered to when handing over the
machine.
Operating instructions
The operating instructions should be
read side by side, and be explained in
detail through practical training on the
machine.
• Regulations for preventing accidents
published by the employer’s liability
insurance associations in the user’s
country
• Technical data
• Operational elements, control and
warning indicators
• Checks before putting the machine
into operation
• Actuation of all functions
• Explanation of maintenance and
inspection intervals according to
Maintenance and Inspection Plan by
demonstrating maintenance points on
machine
• Lubrication intervals and points of
lubrication according to lubrication
chart and demonstration of these
points on the machine
Spare parts list
• Structure of spare parts list, figures
and the respective descriptions
• Instructions for ordering spare parts:
always state the type of machine, the
vehicle identity number (Fz-Id.Nr.),
parts designation, complete spare
part number, piece number, delivery
address, etc.
Warranty
• Explanation of warranty covered by
manufacturer
• Explanation of inspection cards and
note on maintenance and inspection
plan
• Correct filling out of
warranty/handing-over card and
returning the latter to Schaeff
1.5 Notes on using the instruction
book
References to pictures and items
The references to pictures and
items contained in the text, such as
“Figure 2/4“ or (2/4) mean figure 2,
item 4 (Bild = Figure).
The figures shown in this list partly
contain additional equipment.
Attention
This danger symbol is used when
inexact compliance or non-
compliance with operating
instructions, specified work
procedures, etc. may lead to injury
or fatal accidents.
Note
This symbol is employed when
inexact compliance or non-
compliance with operating
instructions, specified work
procedures, etc. may lead to
damage to the machine. This
symbol is also used for information
which is of particular importance to
the user of the machine.
To Next Page
Loading...