8 HT 12 Unimog 1.96
3.4 Lubricant specifications
Hydraulic system: Mineral hydraulic oils
The limit values for hydraulic oils which can be used
for Schaeff construction machines and attachments
are approx. 12 mm ²/s (cSt) at 100°C and approx.
1500mm ²/s (cSt) at -10°C. See also hydraulic oil
recommendation chart for Schaeff construction
machines and attachments.
Biodegradable hydraulic oils
As an alternative to mineral oils, we recommend bio-
degradable hydraulic oils of a synthetic ester base.
The same viscosity specifications apply as for
mineral oils.
Note
When changing from mineral to biodegradable
hydraulic oils, the tank and hydraulic system must be
completely drained, cleaned and flushed.
For further details before changing oils, please
consult your Schaeff dealer.
Grease nipples: Multi-purpose grease to DIN 51825-K 2 G-40
Note
The safety data sheets of the mineral oil companies must be observed when dealing with
lubricants.
3.5 Work attachments
Width Capacity
Bucket with ejector 290 mm 0.062 m
Bucket with ejector 350 mm 0.072 m
Bucket with ejector 450 mm 0.100 m
Bucket 600 mm 0.164 m
Bucket 800 mm 0.204 m
Ditch-cleaning bucket 1,250 mm 0.115 m
Ditch-cleaning bucket 1,500 mm 0.160 m
Clamshell grab 350-450 mm
- Further work attachments available on request -
To Next Page
Loading...
Need help?
General