16 HT 12 Unimog 1.96
5.5.5 Carrying capacities
with the following equipment:
y Without bucket, with load hook
y Bucket cylinder, rocker arm and bucket rod left on the machine
y Machine supported
Values without brackets :
All values apply for the complete slewing range and include a stability factor of 1.25.
These values are determined according to DIN 15019 page 2 and presented according
to DIN 24083.
Values in brackets :
Values correspond to the hydraulic lifting force and only apply in the longitudinal
direction (vehicle longitudinal axis) with the undercarriage supported.
To Next Page
Loading...