24 HT 12 Unimog 1.96
7.5 Overview of lubricating points
Grease all lubricating points with multi-purpose grease
The intervals stated apply to one-shift operation
No.
Lubricating point
Qty.
Daily
1 Bucket - Dipperstick 1 X
2 Bucket - Bucket rod 1 X
3 Bucket cylinder - Bucket rod - Rocker arm 1 X
4 Dipperstick - Rocker arm 1 X
5 Bucket cylinder - Dipperstick 1 X
6 Boom - Dipperstick 1 X
7 Dipperstick cylinder - Dipperstick 1 X
8 Dipperstick cylinder - Boom 1 X
9 Boom cylinder - Boom 1 X
10 Boom cylinder - Slewing column 1 X
11 Boom - Slewing column 1 X
12 Slewing column - Slide 2 X
13 Slewing cylinder - Slide 4 X
14 Slewing cylinder - Slewing column 2 X
15 Operator controls 2 X
Note
• In the event of special operating conditions, e.g. working on
sandy ground, the lubrication intervals should be shortened,
in order to encourage self-cleaning of bearing points.
• Replace damaged grease nipples immediately and check if
grease passes through.
To Next Page
Loading...