10
MON 100
Schaeffler Technologies
High precision bearings for combined loads
Removing bearings from
packaging
The original packaging protects the bearing from minor transport
damage and contamination.
To prevent corrosion, ensure your hands are clean and dry.
Wear safety gloves.
Bearings should only be removed from their original packaging
immediately before assembly.
If the original packaging is damaged, the bearings must be
checked.
Clean any contaminated bearings.
Multi-item packaging
For multi-item packaging with dry preservation, the protective
vapour phase is only effective in closed packaging.
The packaging should be closed again immediately.
Ungreased bearings should be oiled or greased immediately.
Transport of bearings
The bearing must be transported correctly.
In order to prevent the occurrence of personal injury or damage,
the transport specifications must be observed.
Use suitable technical accessories to lift heavy components.
The mounting personnel must be familiar with correct usage of
the accessories and must observe all safety specifications relating to
the handling of suspended loads.
Only use lifting gear, tackle and cranes that are designed, tested and
approved for the specific intended purpose.
The presence or movement of persons, or body parts, under sus-
pended loads is not permitted.
To Next Page
Loading...
