Schaeffler Technologies
MON 100
5
Preparations for fitting
Axial/radial bearings and axial angular contact ball bearings are
precision machine elements. These high precision rolling bearings
will only achieve their maximum operating life and functional
capability if they are fitted correctly.
Bearings with
magneto-resistive angular
measuring system
Axial/radial bearings YRTCM and YRTSM correspond in mechanical
terms to series YRTC and YRTS, but are additionally fitted with
a magnetically coded measurement ring and a protective strip.
Measurement rings are manufactured from a composite material that
has a magnetic multipolar arrangement. This is scanned by magneto-
resistive means.
The protective strip is a piece of adhesive tape and is used to provide
protection during transportation. It must be removed prior to initial
operation.
The measurement ring, which is protected by a protective strip
during transportation and mounting, is located on the cylindrical
outside surface of axial/radial bearings YRTCM and YRTSM.
The measurement ring must be protected against shock loads.
During unpackaging and restorage, ensure that the measurement
ring does not come into contact with tools, wrapping loops or
eye bolts. Similarly, ensure that the cylinder head screws, screw
assembly tools and other tools used do not come into contact with
the measurement ring during mounting and screw mounting of
the outer ring.
To Next Page
Loading...