4
MON 100
Schaeffler Technologies
High precision bearings for combined loads
Measurement ring
Protect the measurement rings against shock loads.
During unpackaging and restorage, ensure that the measurement
ring does not come into contact with tools, wrapping loops or
eye bolts.
Similarly, ensure that the cylinder head screws, tools and screw
assembly tools do not come into contact with the measurement ring
during mounting and screw mounting.
Measurement rings can be scratched, deformed or destroyed in
contact with tools, objects, eye bolts or wrapping loops and under
exposure to high forces. In particular, damage to or deformation
of the measurement ring and its structure will impair or destroy
the angular measurement accuracy.
Measurement ring and
protective strip
(YRTCM, YRTSM)
Shock loads can lead to flaking of the composite material of
the measurement ring.
The protective strip is a piece of adhesive tape and is used to provide
protection during transportation. It must be removed prior to initial
operation.
Measurement ring and
cover ring
(YRTCMA, YRTSMA and YRTCMI)
Shock loads can damage the lattice structure of the measurement
ring and lead to measurement errors.
The cover ring is manufactured from stainless steel and must not be
removed, but must remain on the inner ring.
To Next Page
Loading...
