Service menu 41
Opens the service menu to carry out machine-related settings and test functions
The service menu is only available after entering the current Service PIN.
Used to check the funktion of individual components when troubleshooting
Opens the menu for testing additional components and resetting hardware errors
Stops the fans (normal always running)
Resets the detected hardware errors
Various components monitored independently of each other are displayed.
If an error was detected in a component, this will be displayed with a "1".
All of the detected errors are reset to "0" after resetting (Start button).
Switches the cup heater on
elements
Opens the menu for testing the individual LED's for button illumination
Press the required pad to test (LED) button illumination.
To Next Page
Loading...
