What does 'selection locked heating coffee water' mean on my Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays 'selection locked heating coffee water', the temperature is 10 °C below the programmed temperature, blocking beverage output. Wait until the target temperature has been reached. If the message remains on the display, contact a qualified service technician.
What does 'selection locked insert ground coffee' mean on my Schaerer ?
The 'selection locked insert ground coffee' message on your Schaerer Coffee Maker means the DECAF button was pushed to dispense a DECAF beverage. Open the manual slot (tablet slot) and pour in the DECAF powder (coffee powder).
What does 'selection locked grounds cont missing' mean on my Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays 'selection locked grounds cont missing', it means the grounds container has been pulled out, possibly during a cleaning program, or the end switch is defective. After cleaning the brew chamber, reinsert the grounds container. If the message remains on the display, contact a qualified service technician.
What to do if my Schaerer displays 'selection locked Initialising'?
If the Schaerer Coffee Maker shows 'selection locked Initialising', it means the software and processor are restarting, and the brewer is moving to the 'Home' position, which blocks beverage output. Switch the machine off and then back on. If the message persists, contact a qualified service technician.
What does 'selection locked grinder R blocked' mean on my Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays 'selection locked grinder R blocked', it indicates that an object, such as a stone, has jammed the grinder, blocking the right beverage output. Press the button. If the message remains on the display, switch off the coffee machine and vacuum out coffee beans with the vacuum cleaner. Check if a foreign object has jammed the grinder.
What does 'selection locked grinder L blocked' mean on my Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays 'selection locked grinder L blocked', it indicates that an object, such as a stone, has jammed the grinder, blocking the left beverage output. Press the button. If the message remains on the display, switch off the coffee machine and vacuum out coffee beans with the vacuum cleaner. Check if a foreign object has jammed the grinder.
What to do if Schaerer Coffee Maker shows 'selection locked grinder R overload'?
If your Schaerer Coffee Maker displays 'selection locked grinder R overload', it means the grinder on the right-hand side is overloaded or jammed. Check the grinder for foreign objects and press the button.
What to do if Schaerer shows 'selection locked grinder L overload'?
If your Schaerer Coffee Maker displays 'selection locked grinder L overload', it means the grinder on the left-hand side is overloaded or jammed. Check the grinder for foreign objects and press the button.
What does 'select product water flow error' mean on my Schaerer Coffee Maker and how to fix it?
The 'select product water flow error' message on your Schaerer Coffee Maker could be due to several reasons: no water connection, a defective pump, a blocked brew unit or water system, too fine a grinder mixture, or an electrical problem. Open the shut-off valve and press the beverage button again. Check the brew unit and the grinder mixture. If the message persists, contact a qualified service technician.
What to do if my Schaerer Coffee Maker says 'selection locked waste watertank full'?
If your Schaerer Coffee Maker displays 'selection locked waste watertank full', it means the waste water tank is full. Empty the waste water tank.
General| Brand | Schaerer |
|---|---|
| Model | Coffee Maker |
| Category | Coffee Maker |
| Language | English |
Provides an overview of the coffee maker and the manual's purpose.
Explains how to navigate through the programming menus and set parameters.
Details the main menu options available for the PROGRAM card.
Provides essential information about the machine's servicing and operating conditions.
Refers to a diagram of the machine's components.
Refers to a diagram of the machine's control panel.
Lists the types of beverages that can be dispensed by the machine.
Details the daily output capabilities of the coffee maker.
Instructions for the initial start-up and commissioning of the coffee maker.
Details the required location and environmental conditions for installation.
Specifies the requirements for physically setting up the coffee machine.
Checks to perform before placing the coffee maker into operation.
Steps to prepare the machine for daily use, including filling beans.
Procedure for turning the coffee maker on and initial status messages.
Explanation of status indicators (LEDs) for product availability.
Explains how to navigate through the programming menus and set parameters.
Details the main menu options available for the CHEF card.
Explains how to navigate through the programming menus and set parameters.
Details the main menu options available for the PROGRAM card.
Summary table of daily, weekly, and optional cleaning tasks.
Lists different cleaning modes available for the machine.
Description of the self-triggering automatic rinsing process.
Procedure for performing a hot rinse cycle.
Instructions for cleaning the milk tubes.
List of error messages, their causes, and recommended actions.
Details on optional accessories and their installation.
Information about the expander bracket component.
Step-by-step guide for assembling the expander bracket.
General safety precautions for operating the coffee maker safely.
Warning about the risk of burns from hot liquids and steam.
Warning about potential burns from hot machine components, especially the brew unit.
Warning about the risk of injury from moving parts.
Precautions regarding the filling of containers and handling of cleaning agents.
Warning about contact with cleaning fluids and hot outlets.
Electrical safety warnings and requirements for installation and maintenance.
To Next Page