Domotique embarquée
Embedded home automation
P.10
Domotique embarquée
Embedded home automation
F. Save the state of the outputs in case of power failure
By default, the output status is saved in the event of a power failure.
This function can be disabled from a Navicolor.
G. Congure the block alarm clock
By default, the block wakes up when the power is turned on.
This function can be disabled from a Navicolor.
H. Disable light dimming
By default, dimming is enabled on all outputs.
This function can be disabled on all outputs or only those desired from a Navicolor.
To Next Page
Loading...