Scheppach HMS860 User Manual

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
20
|
GB
Explanation of the symbols on the equipment
The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the ex-
planations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks and
cannot replace correct actions for preventing accidents.
Read and observe the instructions manual and safety regulations before starting the
machine!
Wear ear-mu󰀨s!
Wear a breathing mask. Dust which is injurious to health can be generated when wor-
king on wood and other materials. Never use the tool to work on any materials containing
asbestos!
WARNING! Wear safety goggles. Sparks generated during working or splinters, chips
and dust emitted by the device can cause loss of sight!
WARNING! Risk of injury! Never reach into the planing knife during operation.
Overload switch
Feed direction

Scheppach HMS860 Specifications

General

Power	1500 W
Idle speed	9000 RPM
Product color	Black, Blue, Grey
Dust extraction	Yes
AC input voltage	230 - 240 V
Housing material	-
AC input frequency	50 Hz
Planning width (max)	204 mm

Weight and Dimensions

Depth	805 mm
Width	445 mm
Height	430 mm
Weight	29500 g
Thicknessing table dimensions (W x D)	270 x 251 mm