Scheppach HS80 Translation From The Original Instruction Manual

21
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
DE І 21
Explanation of Symbols
WARNING! Danger to life, risk of injury or damage to the vehicle may be used for non-compliance!
Read through the manual carefully before you work on the power tool.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Attention! Do not reach into the saw blade when it is running.
Note the information about the direction of movement of the tool and the saw blade.
Protection class II
m Attention! These operating instruction provide places concerning your safety which are marked with this indication.
m Caution! Failure to follow these instructions may cause light to medium risk of injury!
m Warning! Failure to follow these instructions may cause danger to life or danger of serious injuries!

Scheppach HS80 Specifications

General

Power	1200 W
Blade Diameter	210 mm
Cutting Depth at 90°	48 mm
Cutting Depth at 45°	45 mm
No-load Speed	4800 rpm
Table Size	525 x 400 mm
Saw Blade Bore	30 mm
Motor	Induction motor