Scheppach IGT2500 User Manual

www.scheppach.com
30
|
GB
18. Generating sets may only be loaded up to their rated power under the rated ambient condition.
If generating set use is under conditions which do not conform to the reference conditions as
stipulated in ISO 8528-8 and if cooling of the engine or alternator is impaired, e.g. as a result of
operation in restricted areas, a reduction in power is necessary.
19. It is necessary reduction in power due to use in higher temperatures, altitudes and humidity as
below conditions.
Max. Working temperature: 40 °C
Max. Altitudes: 1000 m
Max. Humidity: 90 %
20. Keep the generator free of oil, dirt and other impurities.
21. Ensure the sound absorber and air lter work properly. These parts serve as ame protection in
case of misre.
22. Before connecting electric leads, the appliance must reach its full speed. Disconnect leads be-
fore switching o󰀨 the motor.
23. To prevent injury by electric shock, ensure the fuel tank is not completely empty while electric
leads are connected.
24. The load must not exceed the power marked on the rating label of the generator. Overloading
may result in damage to, or a shorter life of the appliance.
25. Do not connect the appliance to household outlets. The generating set must not be connected to
other power sources, such as the power company supply mains. In special cases where stand-
by connection to existing electrical systems is intended, it shall only be performed by a qualied
electrician who has to consider the di󰀨erences between operating equipment using the public
electrical supply network and operating the generating set.
26. Stop the engine:
- whenever you leave the machine
- before refueling
27. Always close the fuel valve when the machine is not in operation.
28. Never use the choke lever to stop the engine.
Warning! This electric tool generates an electromagnetic eld during operation. This eld can impair
active or passive medical implants under certain conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with medical implants consult with their physician and
the manufacturer of the medical implant prior to operating the electric tool.
Safety informations service/ maintenance
1. Only original parts may be used for maintenance and accessories.
2. Replace faulty silencers.
3. Before using, always visually inspect to see that the tools are not worn or damaged. Replace worn
or damaged elements and bolts. Keep all nuts, bolts and screws tight to be sure the equipment is
in safe working condition.
4. Regularly check for leakage or traces of abrasion in the fuel system, such as porous pipes, loose
or missing clamps and damage to the tank or tank cap. Before use all defects must be repaired.
5. Before checking or adjusting the generator or the motor, the ignition plug and the ignition wire re-
spectively must be removed to prevent accidental starting.
m WARNING!
Improper maintenance or ignoring/ not rectifying a problem during the operation may become a
source of danger. Operate your machine only if regularly maintained. Only in this way you can as-
sume that your device is operating safe, economical and without malfunctions.

Scheppach IGT2500 Specifications

General

Fuel type	Gasoline
Noise level	64.1 dB
Rated power	2000 W
Rated voltage	230 V
Ignition system	Manual
Rated DC voltage	12 V
Number of outlets	2
Fuel tank capacity	4.1 L
Engine displacement	80 cm³
Engine number of strokes	4
Castor wheels	No
Product color	Blue
Oil tank capacity	0.35 L
Carrying handle(s)	Yes

Weight and Dimensions

Depth	520 mm
Width	270 mm
Height	440 mm
Weight	17500 g