To Next PageTo Next PageWhat to do if my Scheppach Portable Generator engine does not start?
If your Scheppach Portable Generator's engine won't start, it might be due to the automatic oil cut-out being activated. Check the oil level and add engine oil if necessary. Another reason could be that the generator is out of fuel. In this case, simply refuel it.
Why does my Scheppach SG1000 Portable Generator have too little or no voltage?
If your Scheppach Portable Generator has too little or no voltage, the overcurrent circuit-breaker may have triggered. Try actuating the circuit-breaker and reducing the number of connected devices. Another possible cause is a dirty air filter; clean or replace it. If these steps don't resolve the issue, the controller or capacitor might be defective, and you should contact your dealer.
Why Scheppach SG1000 engine does not start?
If the Scheppach Portable Generator engine doesn't start, first refuel it. If that doesn't work, the controller or capacitor might be defective, so contact your dealer.
What to do if Scheppach Portable Generator air filter dirty?
If the air filter is dirty in your Scheppach Portable Generator, clean or replace the filter.
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Power Output | 700 W |
| Engine Type | air-cooled |
| Starting System | Recoil |
| Displacement | 63cc |
| Fuel Type | Petrol |
| AC Output | 1 x 230 V |
| DC Output | 12 V |
Instructions for attaching and using the measuring cup.
Guidelines for safe use of electrical connections and equipment.
Procedure for grounding the generator's housing for static electricity.
Essential checks before starting the generator for the first time.
Step-by-step guide to starting the generator's engine.
Procedure for safely shutting down the generator's engine.
Instructions for cleaning the generator's exterior and components.
Procedure for cleaning the air filter element.
Guide for checking and cleaning the spark plug.
